Feature 01
Flush to the Wall
Zero gap — sits perfectly flat against the wall for a seamless look.
For Kasa · Treatlife · Lesim · G-Home
Two switches.
One seamless plate.
The world's first flush-fit, 100% screwless cover plate built for side-by-side smart switches. No gaps. No exposed hardware. Just a clean, glossy finish that disappears into your wall.
128 × 128 mm
Screwless
Polycarbonate
Flush Mount
The Problem
Other plates protrude. Ours doesn't.
Brands like Bestten and Enerlites only cover a single switch, leave exposed screws, require an inner mounting bracket, and stick out from the wall. Reinvented Works covers two switches at once, snaps on screwless, and sits perfectly flush — like it was built into the wall.
Design
Built different.
On purpose.
Every detail is deliberate — from the glossy finish that matches your switches to the polycarbonate that won't crack under pressure.
Unbreakable Polycarbonate
Military-grade polycarbonate construction resists impacts, heat, and UV. It won't yellow, crack, or warp over time like standard ABS plastic.
100% Screwless
No visible screws. No holes to patch. The plate clicks into place and stays put.
No Inner Bracket
Completely bracketless design. One piece, no extra hardware, no extra steps.
Flush to the Wall
Zero gap between plate and wall surface. It looks like it was installed by a professional electrician.
Glossy Matched Finish
The gloss level is tuned to match the surface finish of your smart switches for a cohesive, seamless look.
128 × 128 mm Square
Precisely sized to cover a standard US 2-gang wall box while maintaining the square profile that matches your switches. Fits a standard US 2-gang electrical box.
Compatibility
Works with the switches
you already have.
Primarily engineered for Kasa / TP-Link, and also fits a growing list of popular decorator-style smart switches. Not all switches are compatible — see the full list below.
Primary
Kasa / TP-Link
KS220 · KS230 · EP25
This plate is built and optimized around Kasa's decorator-style paddle switch profile.
Treatlife
DS01 · DS02
Lesim
Smart Paddle Series
G-Home
Decorator Switch Series
Not Compatible
Bestten · Enerlites
These brands protrude from the wall and don't achieve the flush fit this plate is designed for — which is exactly the problem we set out to solve.
Installation
Five steps.
No electrician needed.
The key is a technique unique to Reinvented Works: flipping the plate smooth-side down to set switch spacing before you tighten anything. Takes about 5 minutes.
-
01
Cut the power
Flip the breaker for the circuit you're working on. Safety first — always.
-
02
Remove the old plate
Unscrew and pull off your existing cover plate. Set it aside.
-
03
The key step: flip it smooth-side down
Lay the Reinvented Works plate face-down flat on the wall over both switches. This lets you slide the switches to the correct horizontal spacing before tightening. This is the most important step — don't skip it.
-
04
Tighten the switch screws
With the plate still face-down, tighten the mounting screws on both switches to lock them in position.
-
05
Snap it on, restore power
Flip the plate face-up and press it over both switches — it snaps into place and sits flush. Restore power at the breaker. Done.
To remove: Insert a flathead screwdriver into either of the two release slits on the bottom edge and gently lever up.
Gallery
In the home.
See how it looks installed in real living spaces.
FAQ
Common questions.
Does this work with all smart switches?
No — it's designed specifically for decorator-style smart switches with a paddle profile. Confirmed compatible models include Kasa/TP-Link (KS220, KS230, EP25), Treatlife (DS01, DS02), Lesim smart paddle, and G-Home decorator switches. It's primarily optimized for Kasa switches. Not all switch brands will fit — if you're unsure, check the compatibility section above before purchasing.
Will this cover a standard US 2-gang wall box?
Yes. The plate is 128 × 128 mm — sized precisely to cover a standard US 2-gang electrical box with the switches installed side by side.
Do I need any tools to install it?
You'll need a screwdriver to tighten the switch mounting screws during the spacing step — that's it. No tools are needed to attach or remove the cover plate itself. To remove, just use a flathead screwdriver in one of the two bottom release slits.
What are those two slots on the bottom of the plate?
Those are the flathead release slits. There are two of them — spaced about a third from each edge of the plate bottom. Insert a flathead screwdriver into either one and gently lever upward to pop the plate off the wall without damaging it or the switches.
Why does it need to be placed smooth-side down during install?
This is the key installation technique that makes the flush fit possible. By laying the plate face-down over both switches before tightening them, you let the plate itself dictate the exact horizontal position of each switch. When you then flip the plate over and snap it on, both switches align perfectly with the cutouts — no gaps, no adjustments needed.
Can I use this with a single switch?
No — this plate is designed specifically for two smart switches side by side in a 2-gang configuration. It won't fit properly over a single switch.
What material is the plate made from?
Unbreakable polycarbonate with a glossy white finish. Polycarbonate is significantly stronger and more heat-resistant than the standard ABS plastic used by most competitors. It won't yellow or crack over time.
Why don't competitors have flush fit options?
Most cover plates on the market — like those from Bestten and Enerlites — are designed for a single switch and rely on exposed screws and inner mounting brackets. They were never engineered for the two-switch flush configuration. Reinvented Works was built from scratch specifically to solve this gap in the market.
Ready to upgrade your wall?
Available now on Amazon. Fits in minutes, looks custom for years.